Here are some of the more common bolts to keep in your toolbox:
1 .Carriage Bolts: Carriage bolts are used mainly in making furniture. They have a round head with a square collar and are tightened into place with a nut and wrench. The collar fits into a prebored hole or twists into the wood, preventing the bolt from turning as the nut is tightened. Carriage bolts are coarse-threaded and are available in diameters from 3⁄16 to 3/4 inch and lengths from 1/2 inch to 10 inches.
2 .Stove Bolts: Stove bolts aren't just for stoves; they are quite versatile and can be used for almost any fastening job. They are available in a wide range of sizes, have a slotted head -- flat, oval, or round, like screws -- and are driven with a screwdriver or tightened into place with a nut and wrench. Most stove bolts are completely threaded, but the larger ones may have a smooth shank near the bolt head. Stove bolts are coarse-threaded and are available in diameters from 5⁄32 to 1/2 inch and lengths from 3/8 inch to 6 inches.
3 .Machine Bolts: Machine bolts have either a square head or a hexagonal head. They are fastened with square nuts or hex nuts and are wrench-driven. Machine bolts are manufactured in very large sizes; the bolt diameter increases with length. They are either coarse-threaded or fine-threaded and are available in diameters from 1/4 inch to 2 inches and lengths from 1/4 inch to 30 inches.
4 .Masonry Bolts and Anchors: These work on the same principle as the lag bolt or screw; a plastic sleeve expands inside a predrilled hole as the bolt is tightened.
5 .Hollow Wall Bolts: Toggle bolts and expansion bolts are used for fastening lightweight objects, such as picture frames, to hollow walls. Toggle bolt wings are opened inside the wall by a spring. Expansion bolts are inserted into an expansion jacket, which expands as the bolt is tightened. The bolts are available in diameters from 1/8 to 1/2 inch and lengths up to 8 inches for walls as thick as 1 3/4 inches.
本文转自：China Industry News