Pneumatic tools is the use of air compressors to provide compressed air energy to work for the power source device can be used to tighten the screws, drilling, tapping and other machining applications. Generally speaking, pneumatic tools include: vane eccentric motor, deceleration Gear, Control twisting bodies, chuck, etc..
Safety Code
(1) The use of pneumatic tools, please be sure to read the finished copy of this manual, only fully understand the contents before the use of pneumatic tools in the workplace, and the need to strictly enforce its contents. Do not use the tool exceeds the maximum operating pressure, (100PSI/7.0BAR/7.0kg/cm2) often make more than operating pressure pneumatic tools in the work environment, it will greatly reduce the tool life of its own.
(2) the replacement of tools or accessories please pneumatic fittings will be removed from the air at source.
(3) operation as much as possible to wear goggles. Earplugs. Masks to protect its own security.
(4) The operation Do not wear loose clothing. Scarf. Tie or jewelry, to avoid being moved or turned parts involved and dangerous.
(5) pneumatic tools and high-pressure gas source connected, the non-use, do not press the trigger.
(6) at any time to ensure that spare parts situation, loose parts can lead to serious danger.
(7) The replacement of worn parts, please use the dedicated spare parts.
(8) Do not use the air compressor tube damage or impact.
(9) Do not point the tool to himself or others.
(10) before use to check whether there are more vulnerable Pneumatic tubes or damaged the office, if found to the situation, immediately updated to maintain security.
(11) Lock all the nuts, screws, and to identify all equipment is in safe condition. Appropriate lubrication is a tool the user's responsibility. Compressed air will contain water vapor condensation, could easily lead to corrosion if there is no proper lubrication will greatly shorten the life of pneumatic tools.
Should be noted that the pneumatic tools are required to be lubricated before and after use. Part of the lubrication of air motors, air motors need lubrication every day, but the number of not too much.
本文转自：China Industry News
本文链接：http://news.made-cn.org/post/Pneumatic-tool-use-and-maintenance.html